Voco-Ufi-Gel-Hard

Denture Relining Material
Brand : Voco
  Free shipping available on order of 2200 and above.
  7 Days Return Policy.
  100% Genuine Products.

  Check COD Availability

3% OFF
Rs. 9,500 Rs. 9,200

FEATURES

  • Only one appointment required
  • Methylmethacrylate-free
  • Neutral taste and odour
  • No heat development in the mouth 
  • As easy as taking an impression
  • Lower costs for your clinic
  • Aesthetic, high patient acceptance and comfort
  • New layers can be added at any time

Ufi Gel Hard and Ufi Gel Hard C

  • Ufi Gel Hard C - Direct hard relining material perfectly mixed from the cartridge for simple, time-saving and bubble-free application
  • Ufi Gel Hard is the Handmix version of Ufi Gel Hard C

INDICATIONS

  • Hard permanent relining
  • Direct and indirect relining
  • Total or partial relining
  • Ambulant relining
  • Lengthening of denture rims
  • Repair and enlargement of dentures
Correction of new dentures

DIRECTION TO USE

  • Application of Ufi Gel hard
  • Apply the material evenly onto the prepared margin and/or base of the denture with a plastic spatula.
  • Prevent build-up of excess material, remove with a suitable instrument if necessary.
  • Re-insert denture and have the patient exert slight pressure in terminal occlusion for 1 min.
  • Then carry out functional, chewing and swallowing movements for 2 min.
  • Ensure that no material flows into the throat when relining an upper denture, especially at the transition from hard to soft palate (A-line).
  • Partial and total denture with undercuts
  • Remove denture 5 min after commencement of mixing and remove excess material immediately with scissors or a scalpel.
  • Insert again into the mouth for a final occlusion check and allow to cure for about 2 - 3 min.
  • Instead of re-inserting the denture, curing can also be completed in warm water, e.g. in a pressure pot at approx. 40 °C.
  • Do not let the material cure in contact with air since atmospheric oxygen will cause an uncured inhibition layer on the surface.
  • Total dentures without undercuts
  • Excess material can be removed intra- or extraorally before final polymerisation.
  • Intraorally: remove excess material after 5 min (from beginning of mixing) with a suitable instrument.
  • Let the denture cure for further 2 - 3 min in the mouth until Ufi Gel hard is completely cured

Voco Ufi Gel Hard Set

  • 1 x Powder 60 g  
  • 1 x liquid 40 ml  
  • 1 x Conditioner 20ml  
  • Accessories

Voco Ufi Gel Hard C -Set Cartridge 80g 

  • 1 x 80g Cartridge  
  • 1x 10ml bottle  
  • Accessories
Voco-Ufi-Gel-Hard
You have successfully subscribed!