Flowable light-curingfilling material
Brand : Voco
  Free shipping available on order of 2200 and above.
  7 Days Return Policy.
  100% Genuine Products.

  Check COD Availability

46% OFF
Shade Price Quantity
A1 Rs. 1,050
A2 Rs. 1,050
A3 Rs. 1,050

Flowable light-curing nano-hybrid filling material.


  • Ideal flowability
  • Outstanding physical properties
  • Excellent wetting properties
  • Very high filler content (> 76 % w/w)
  • Significantly less polymerisation shrinkage (3.2 %)
  • Extremely high resistance to abrasion (ACTA < 35 μm)


    • Store at temperatures of 4 °C to 23 °C.
    • Polofil NHT Flow may be refrigerated, but must be allowed to reach room temperature before use.



    • Let the material reach room temperature before application. 
    • Place a matrix on cavities in the approximal area. 
    • Using transparent matrices is advantageous. 
    • Lock the application cannula (type 41) onto the syringe with a clockwise turn and apply Polofil NHT Flow directly. 
    • For fillings of more than 2 mm, apply and polymerise in layers.


    • Conventional polymerisation devices are suitable for lightcuring this material.
    • Halogen light devices should have a minimum light output of 500 mW/cm2 , LED lamps should have a minimum output of 300 mW/cm2 . 
    • The curing time is 20 s minimum per layer.
    • Hold the tip of the curing light as close as possible to the surface of the filling. 
    • If the distance is more than 5 mm, the curing depth will be reduced. 
    • Insufficient curing can lead to discolouration and pulp irritation.


    • The filling can be finished and polished immediately after removing the shaping aids (e.g. fine and extra-fine grain diamonds, polishing discs). 
    • During finishing and polishing, the filling must be cooled. 
    • The margin of the filling, or even better, the entire tooth should be fluoridated as a final step.
    • 1 x 1.8 gm Refill
    You have successfully subscribed!