Glass ionomer restorative material
Brand : Voco
  Free shipping available on order of 2200 and above.
  7 Days Return Policy.
  100% Genuine Products.

  Check COD Availability

3% OFF
Rs. 9,650 Rs. 9,350


  • Variable mixing time for adjustment of consistency
  • Can be modelled immediately after insertion without sticking to the instrument
  • In VOCO´s new application capsule, easy activation without activator
  • The new capsule design reaches smaller cavities and difficult-to-access areas in the mouth
  • High compressive strength and abrasion resistance


  • Store IonoStar Molar in a dry place at temperatures of 15 °C - 23 °C.
  • Only remove it from the foil immediately before use.


  • Carefully open the outlet by lifting the cannula until you feel a stop and apply the material directly into the cavity within 15 s of the end of mixing by compressing the lever on the applicator slowly and evenly.
  • The cannula can be aligned as required by turning the whole application capsule inside the holder. Working time and consistency may be influenced by the respective type of capsule mixer and mixing time.
  • Following mixing, IonoStar Molar can be worked for at least 1.5 minutes (at room temperature).
  • Prevent the material from being contaminated with moisture and from drying out.
  • If it is not possible to keep the working area dry, a protective varnish should be applied after the contours/modelling have been finished (see corresponding instructions for use).
  • The restoration can be finished, e.g. with a diamond bur or a polisher, 5 - 6 minutes after the start of mixing at the earliest.
  • A protective varnish should then be applied again (see corresponding instructions for use).
  • 50 x Application Capsules
You have successfully subscribed!