Prevest Micron Luting

Glass Ionomer Luting Cement
Brand : Prevest
  Free shipping available on order of 2200 and above.
  7 Days Return Policy.
  100% Genuine Products.

  Check COD Availability

52% OFF
Rs. 950 Rs. 455

FEATURES

  • Translucent shade.
  • Very low film thickness
  • High fluoride release.
  • Low solubility

Micron Luting is convenient self curing , fine particle, fluoride releasing, glass ionomer luting cement for crowns , bridges, securing inlays, onlays, post and orthodontic brackets.

Micron Luting is the Ideal radiopaque, self curing translucent, particle glass-ionomer luting material with excellent tooth adhesion high fluoride release and flowability, It is useful for a wide range of clinical applications. Micron luting is available in a universal light yellow shade in Powder and Liquid Kits.

INDICATION

  • Cementation of posts and screws
  • Attachment of metals orthodontics bands
  • Cementation of inlays, onlays and crowns

ADVANTAGES

  • High fluoride release.
  • Low solubility.
  • Translucent shade.
  • Very low film thickness

DIRECTION TO USE

A. Tooth Preparation :

  • Prepare tooth in usual manner.
  • For pulp capping, use calcium hydroxide paste Calcigel.
  • Clean the prepared teeth with pumice and water.
  • Rinse thoroughly with water.
  • Remove excess moisture by blotting with a cotton pellet or gently blowing with an oil free air.
  • DO NOT DESICCATE. Prepared surfaces should appear moist (glistering).

B. Restoration Preparation :

  • Make sure that the restoration is pretreated and handled according to the manufacturer’s instructions.

C. Powder and Liquid Dispensing : 

  • The standard powder to liquid ratio is 0.19/0.12 (1 level scoop of powder to 2 drops of liquid.
  • For accurate dispensing of powder lightly tap the bottle against the hand. Do not shake or invert.
  • Hold the liquid bottle vertically and squeeze gently.
  • Close bottle immediately after use.

D. Mixing:

  • Dispense Powder and Liquid into the pad.
  • Using the plastic spatula add all the powder to the liquid.
  • Mix rapidly for 45-60 seconds.

NOTE : 

  • When mixing larger amounts, divide the powder into two equal parts.
  • Mix the first portion with all of liquid for 15 seconds.
  • Incorporate the remaining portion & mix the whole thoroughly for 45 seconds (Total 60 seconds).

E. Applications: Immediately apply (within 1 minute after dispensing) to the surfaces to be coated using a micro applicators. DO NOT AIR BLOW.

NOTE : Should the coated surfaces be contaminated with water, blood or saliva, wash and dry the surface and repeat the coating procedure.

F. Cementation: 

  • Coat the internal surface of the restoration with sufficient cement and seat immediately.
  • The working time is 2 minutes from start of mixing at 23±1°C (73.40±1°F).
  • Higher temperature shorten working time.
  • Maintain Moderate pressure.
  • Start removing excess cement when it feels rubbery.
  • Finishing can be started 4 minutes 30 seconds after seating the restoration.

COMPOSITION

  • Powder: Fluoro Alumina Silicate Glass Powder
  • Liquid: Polyacrylic Acid Liquid (Thin Viscosity)

Powder/Liquid ratio: (0.19/0.12)

  • Mixing time (min. sec) : 45-60 seconds,
  • setting time (min. sec) : 2min 30sec, (at 23±1°C from start of mixing)
  • Final finishing commencing time (after seating the restoration) : 5 min.

CONTRAINDICATION

  • Micron Luting should not be used if the patient is known to be allergic to any of the ingredient used.
  • Do not apply the material directly onto areas near the pulp or onto the exposed pulp as irritation may occur.

STORAGE

  • Store at temperature between 10°C to 24°C.
  • Close the cap carefully after use.
  • Keep away from moisture.
  • Shelf life not affected after opening if stored in a cool dry place.

Shelf Life: 3 Years from date of manufacturing

Powder- Liquid Kit:

  • 1 x Powder Jar 15g
  • 1 x Liquid Bottle 10ml
  • 1 x Mixing Pad.
  • 1 x Spoon.
Prevest Micron Luting
You have successfully subscribed!