Prevest Fusion Universal Composite Kit

Light Cured Universal Nano Hybrid Composite
Brand : Prevest
  Free shipping available on order of 2200 and above.
  7 Days Return Policy.
  100% Genuine Products.

  Check COD Availability

45% OFF
Rs. 4,550 Rs. 2,490


  • Extremely high abrasion resistance
  • Higher filler contents
  • Excellent physical properties for long lasting restorations
  • Lower polymerization shrinkage than conventional composites

It is a visible light cured, radiopaque highly filled, nano filled hybrid composite restorative material for all cavity classes of anterior and posterior teeth.


  • Direct Restoration of all cavity classes in anterior and posterior teeth.
  • Preventive polymerization and repairs of composite ceramic veneers.
  • Correction of shade and shade for better aesthetics.
  • Core build-up & Composite inlays


  • Excellent physical properties for long lasting restorations.
  • Lower polymerization shrinkage than conventional composites.
  • Higher filler contents.
  • Extremely high abrasion resistance.


  • Bisphenol  a Glycidyl methacrylate
  • Bisphenol a diethoxy methacrylate
  • Urethane dimethacrylate
  • Triethylene gycol dimethacrylate
  • Silanated barium glass powder
  • Amorphous fumed silica





Particle size

0.01 to 0.1 µm (agglomerated)

1: 0.1- to 2-µm glass

2: 40-nm silica

1: 0.1- to 2-µm glass or resin micro particles

2: ≤100-nm nanoparticles

Clinical use

Sub gingival lesions

Smooth surfaces

Anterior aesthetic

w.r.t (1) Moderate-stress areas requiring optimal polishability (Classes III, IV)

Wrt  (1) Moderate-stress areas requiring optimal Polishability

w.r.t (2) (Classes III, IV)


Simulates actual enamel surface

Highest aesthetic level

Better wear properties than any other

High luster and hold their polish over time

Stain and plaque resistant

Highest reflective and refractive indices hence more realistic translucency

Simulate the dentin of natural tooth structure.

Higher strength can be used as substructure under microfills enamel layer.

Most Opaque of the 3 composite types, also great for masking out unwanted color and achieving extreme color changes.

Exhibit higher polishability

Better surface smoothness

Lifelike opacious translucency


Less strength than micro and nanohybrid

Dec. water sorption

Less polishable

More difficult to marginate, and will wear faster than microfill resins.


Don't hold their polish long  as microfills but better than microhybrids

More susceptible to plaque and staining over time.

Less biological compatible with gingival tissues



Class III & calss V

Anterior and posterior restorations

Can be used to fill the bulk of the tooth

Posterior restorations

Veneering manidbular anteriors

Building up incisal edges

Class IV restoration

Increasing cuspid rise

When the doctor wants to use only one material

Customer Reviews

Based on 4 reviews Write a review

Instructions for use :

  • Step 1: Clean the tooth to be treated and adjacent  teeth with a brush and prophy paste and select the shade using Shade Guide.
  • Step 2: Prepare the cavity(No residual amalgam or other base material should be left in the cavity)
  • Step 3: Apply Actino 37% Phosphoric Acid Etchant Gel for 15-20 sec.
  • Step 4: Remove Gel with vigorous water spray and rinse conditioned area for at least 10 sec.
  • Step 5: Blot dry conditioned area with a moist cotton pellet.
  • Step 6: Apply Fusion Bond 5 dentine bonding agent with a disposable brush to the entire cavity.
  • Step 7: Ensure thorough wetting of the entire cavity.
  • Step 8: Allow 20 sec air drying and re apply another coat of dentine bonding agent.
  • Step 9: Remove excess solvent by gently drying with dry air for at least 5sec to ensure uniform glossy surface.
  • Step 10: Cure adhesive for 20-30 sec using standard curing light.
  • Step 11: Dispense the material using shaping instruments.
  • Step 12: Contour the material in the cavity.
  • Step 13: Light cure for 40 sec using standard curing light.
  • Step 14: When necessary build in increments of 2mm maximum using a layering technique.
  • Step 15: Shape and polish using standard technique and at last stage apply Nano Coat protective varnish.

1. Is the finished product stable over time (15 to 20 years) or how strong is the restoration?

 Although, nanohybrids show higher strength, it equally depends on  dentist’s technical ability

2. What are the translucency and opacity characteristics of the material?

Less opacious than microhybrids, nonetheless posess lifelife opacious translucency.

3. When finished properly, are the composite and gingival tissues biocompatible?

Microfills are the most biocompatible as compared to nano and microhybrids

4. What material has adequate strength for the purpose of use?

Microhybrids posess higher strength than nanohybrids. 

5. What material is more wear resistant? Why?

Among all 3 types of composites resin materials, microfills are the most wear resistant

Combo Kit :

  • 7 X 4g syringes (A1.A2. A3.A3.5. B1. B2. B3)
  • 1 x 5ml Bottle Fusion Bond 5
  • 1 x 2 ml syringe Actino Etchant Gel
  • 10 x Micro Brushes
  • 10 x Applicators Tips
  • Instruction Manual
Prevest Fusion Universal Composite Kit
You have successfully subscribed!