Filay Dent Wamkey Kit

Crown Remover
Brand : Filay Dent
  Free shipping available on order of 2200 and above.
  7 Days Return Policy.
  100% Genuine Products.

  Check COD Availability

13% OFF
Rs. 18,414 Rs. 15,999


  • It will not cause any pain to your patients.
  • WAMkey exerts only a natural compressive pressure on the supporting tooth, which gradually increases until the crown is easily removed without impact, damage, or discomfort.

 WAMkey preserve's the crown or the bridge to allow temporary or permanent re-use:

  • The main parts of the crown (margins, occlusal face, and contact points) are preserved undamaged.
  • Additionally, in many situations, the initial window can be cut with the CMV bur on the lingual face

 Why is this Wamkey System important?

  • Because after its removal, the prosthesis retains all its mechanical and aesthetic properties
  • The dentist can either make a small instant composite repair or refer to the technician. Thus, a provisional or permanent reset is possible.
  • The pressure on the filling is particularly low, so that operator can dismiss any risk of leakage.


WAMkey disassociates the crown from its abutment without applying ANY traction or tensile forces, or sideways movement. Wamkey doesn't pull the crown off, it actually PUSHES it off from underneath! PERFECT! Thus, there is no risk to fracture the tooth or to remove the build-up underneath.

  • WAMkey allows you to remove the crown in 1 or 2 minutes and in some cases, less than a minute
  • By avoiding cutting the whole crown off, you also save your rotative materials.

With outdated traditional methods, the removal process can be time-consuming and expensive, and the result uncertain. With WAMkey, your precious time is saved, because the entry window made in the crown is very small. By avoiding cutting the whole crown off, you also save your rotative materials (contra-angles, hand-pieces, and drills...). And don't forget that in many situations you can also reset the crown provisionally or permanently.


  • Step 1: Locate the most accessible spot on the crown. The goal is to estimate the cement layer level between the occlusal surface of the abutment and the inner side of the crown itself.
  • Step 2: Drill a thin horizontal window in the crown.
  • Step 3: Enlarge this window until you can see the cement layer through the window.
  • Step 4: Then, after having checked that the slot is at the cement level, deepen the hole until it reaches the center of the tooth preparation.
  • Step 5: Slightly extend the hole to form a horizontal rectangle.
  • Step 6: Finally, introduce the key down to the bottom of the slot and make a simple rotation on the handle. The crown is removed!

In many cases, you'll be fooled into thinking that the WAMkey is meeting no resistance; even the patient may feel nothing at all. So watch attentively and ask your patient to listen carefully.

Kit of 3 Keys

  • 1x Key No.1  
  • 1 x Key No.2  
  • 1 x Key No.3  
  • 3 x Burs
Filay Dent Wamkey Kit
You have successfully subscribed!