Dentsply Aquasil Soft Putty Regular Set
High Viscosity Rubber Base Impression MaterialBrand : Dentsply



Check COD Availability

7% OFF
Rs. 7,040
Rs. 6,499
Aquasil Soft Putty/Regular Set is a very high viscosity impression material with optimum flexibility for easy removal from undercuts.
FEATURES & ADVANTAGES
- Very high viscosity elastomer
- Excellent hydrophilicity
- Outstanding dimensional accuracy
- Resistance to permanent deformation
- Precision dental impressions
- More stable dimensionally in storage ( No syneresis, imbibition or evaporation)
INDICATION: It is for use as a tray material for the double mix technique or as primary impression material for a two-step putty/wash technique.
DIRECTIONS TO USE
- Step 1: Preparation of Impression Area: Clean the Impression area with air/water spray and remove excess water.
- Step 2- Mixing and filling the tray: Take equal amounts of catalyst and base using the color-coded measuring spoons and knead with fingertips until the color of the mix is uniform. Immediately fill the prepared tray.
NOTE: Do not interchange measuring spoons and tub lids.
COMPOSITION
Base:
- Silica Crystalline
- Vinyldimethicone
- Zeolith Highly dispersed silica (AEROSIL®1)
- Paraffine oil
- Polydimethyl-hydrogen siloxane
- Green pigment (Cosmetic Green, C.I. 77288)
- Yellow pigment (Arc Yellow A16 N)
Catalyst:
- Silica Crystalline
- Vinyldimethicone
- Zeolith
- Highly dispersed silica (AEROSIL®1)
- Paraffine oil
- Platinum complex + Pt-metal
- Calcium carbonate 1,3-Divinyltetramethyldisiloxane
- Titanium dioxide
PROPERTIES OF AQUASIL PUTTY
- Material Properties: Aquasil Soft Putty
- Delivery System: Tubs
- Mixing technique: Knead with fingertips until a uniform color is achieved.
- Mixing Ratio: 1:1
- Linear dimensional change: 0.05%
- Maximum compression strain: 3.5%
- Permanent deformation: 0.5%
- Recovery from deformation: 99.5%
- Reproduction of detail: <50µm
HANDLING CHARACTERISTICS | ||
Application |
Time (seconds) | |
Aquasil Soft Putty | Aquasil Ultra LV (Regular Set) | |
Mixing time | 0:30 | N/A |
Application time | 1:30 | 2:15 |
Minimum time in mouth (ISO) | 3:00 | 2:45 |
Setting time | 4:30 |
5:00
|
- 1 x 450 ml Catalyst
- 1 x 450 ml Base
- 2 Spoons