Being Foshan LED Airotor 401P-B2
LED Airotor with high speed, ergonomic grip , light weightBrand : Being Foshan



Check COD Availability

21% OFF
Rs. 5,599
Rs. 4,390
Being Foshan LED Airotor 401P-B2
FEATURES
- Offers better eyeshot and angle, improving the efficiency
- High-density cartridge, with high cutting efficiency but less vibration and noise
- Newly-designed handle, comfortable to hold and easy to clean
- Autoclavable handpiece
Customer Reviews
Based on 1 review
Write a review
TECHNICAL SPECIFICATIONS
AIR PRESSURE | 180-250 KPa (1.8-2.5 kgf / cm2) |
GAS CONSUMPTION | ≥1.5L/min. |
NOISE | ≤70dB |
ROTATION RANGE | 380,000- 450,000rpm |
COOLING WATER PRESSURE | 0.2MPa |
MAX. LENGTH OF NON-ROTATION PART | 13.14mm |
HANDPIECE HEAD DIAMETER | ø11.2mm |
COMPATIBLE DIAMOND BUR | ISO1797-1 Type 3 ø1.59-1.6mm |
COMPATIBLE DIAMOND BUR LENGTH | 21mm-23mm |
HANDPIECE CONNECT METHOD | ISO 9168, YY/T 0514 |
TORQUE PARAMETER | ≥0.016Nm |
STERILIZATION
- Brush off excess dirt & wipe clean with alcohol-soaked cloth.
- Insert the handpiece in a sterilization pouch & seal it.
- Autoclavable up to max. 134°C after high temperature sterilization & disinfection.
- Handpiece is resistant to at least 250 times of high temperature sterilization & disinfection.
LUBRICATION
- Use oil spray or other standard oil spray after each use and/or before autoclaving.
- Manufacturer/Importer warranty of 3 months as applicable for this product.
- Service and Warranty are handled by the manufacturer/importer directly for this product
- Flipdent will not be liable to replace the Products and the liability to replace any such Product is that of the Manufacturer/Importer
- Flipdent and the Buyer acknowledge that the Products purchased/used are a subject matter of original Manufacturer/Importer’s warranties only
- Any or all claims in relation to returns and replacement shall be made to the concerned Manufacturer/Importer only and Flipdent may assist the customer in registering a request to get the Product replaced or serviced.
- The Buyer acknowledges that the Products once sold will not be exchanged or taken back unless the seal of the package or the Product is intact or not altered in any manner or does not tamper as the case may be.